ARTWORK
Artwork consists of logos, images, text and any other information
you wish to place on to any of the products.
For paper printed products we accept high-resolution images and vector
logo’s preferable or a high-resolution image.
For supplied artwork please allow a minimum of 6mm bleed all the way around
the cut size. I.e. bookmark cut size is 210mm x 60mm the bleed is 216mm
x 66mm.
Please do not use logo’s or images taken from a website unless
you have authorisation and know that the artwork is of a high quality
JPG, PDF, AI, EPS file.
FILE FORMATS
Please note all file formats must be compatible with a
PC.
Vector Images - SUITABLE
- Corel Draw version X3 or below (.cdr)
- Adobe Illustrator 10 or below (.ai)
Pixel Images - SUITABLE
- JPG, TIF, Bitmap, PDF and images attached within Word documents are
suitable but the must be high resolution (300 dpi minimum).
We can recreate or redraw logos and designs if necessary.
If you require this, please call us for further information on 0116
2422 756.
TEXT/COPY
When supplying us with text, please make sure you have
converted all fonts to CURVES and/or OUTLINES. If a font has been included
in your artwork, but is not on our system, the artwork will more than
likely not open the way it should.
If you want to check with us first whether we already have the fonts you
require, or if you would like to supply us with any fonts, please make
sure you have the rights to do this.
Text can also be supplied in the email or WORD document; we can take it
from there.
COLOURS
If the artwork you are supplying consists of one or more
colours please remember to specify the PRINT COLOUR/S. If you require
a more specific colour, please refer to the Pantone Matching System (PMS)
for this.
If you have any questions,
or would like any help please call us on 0116 2422
756 or email: amelia@communitymedia.co.uk.
We are always very happy to make recommendations give advice and help
in any way we can.
|